This connecting link is the part that allows you to close and tension a drive chain cut to the exact length for the bike, a common replacement in secondary transmission maintenance. It is identified by its 1/2x3/16" format, corresponding to the pitch and roller width of the chain it is designed for, within the KTM PowerParts range.
The assembly carries HOMNN_EU approval, confirming that it meets the European regulations required for this type of transmission component. Its function is to join the two ends of the chain by means of two side plates passed through the roller pins, closed with a retaining clip that prevents the joint from opening during use.
The photograph shows the metallic finish typical of this type of link, with the two parallel plates, the protruding pins where the rollers fit, and the omega-shaped clip that completes the assembly on the outer side, revealing the characteristic profile of a detachable chain joint.
As an approved link, it is the right choice for closing a new chain of this pitch and width, or for replacing a damaged or worn connecting link, maintaining the continuity and strength of the rest of the chain.
45110166000
Data sheet
APPROVALS
HOMNN_EU
Los productos disponibles se enviarán siempre que haya existencias. Aquellos que no estén disponibles de forma inmediata se solicitarán a nuestro proveedor oficial cada día laborable, momento en el que se calcularán los tiempos estimados de recepción, salvo durante el 24 de diciembre al 2 de enero, periodo en el que los pedidos se gestionarán a partir del 2 de enero debido a las vacaciones.
Los envíos se realizan mediante transportista, con un plazo aproximado de 48 a 72 horas laborables para entregas nacionales. Los envíos internacionales pueden tardar entre 5 y 10 días laborables, salvo en periodos de parón por mantenimiento, vacaciones o alta demanda, como durante el Black Friday.
La entrega de motos se coordina directamente con el comercial durante la compra.
