These 5.5x20x1.5 clutch spring support washers are a small component used in the clutch assembly, specifically as a seat for the springs that regulate its pressure, within the PowerParts transmission spares range. They are aimed at anyone disassembling the clutch for inspection or replacement of components.
These are metal washers with an inner diameter of 5.5 mm, outer diameter of 20 mm and a thickness of 1.5 mm, dimensions that determine the correct seating of the spring on the pressure plate and that must be respected in order to maintain the intended preload of the assembly.
The photo shows several flat washers with a metallic finish, circular in shape with a central hole, stacked or placed side by side, showing a thin, uniform thickness around their entire perimeter.
By acting as the spring's bearing surface, these washers help distribute the load evenly over the clutch pressure plate, helping the pressure exerted by the springs remain stable during use.
Los productos disponibles se enviarán siempre que haya existencias. Aquellos que no estén disponibles de forma inmediata se solicitarán a nuestro proveedor oficial cada día laborable, momento en el que se calcularán los tiempos estimados de recepción, salvo durante el 24 de diciembre al 2 de enero, periodo en el que los pedidos se gestionarán a partir del 2 de enero debido a las vacaciones.
Los envíos se realizan mediante transportista, con un plazo aproximado de 48 a 72 horas laborables para entregas nacionales. Los envíos internacionales pueden tardar entre 5 y 10 días laborables, salvo en periodos de parón por mantenimiento, vacaciones o alta demanda, como durante el Black Friday.
La entrega de motos se coordina directamente con el comercial durante la compra.
