This hollow bleed screw allows air to be purged from the front brake circuit without removing the caliper, a routine task in periodic brake system maintenance and after any work on the hydraulic circuit. It is especially useful for those who bleed the brakes fairly often, whether at home or in the workshop.
It is made from aluminium and stainless steel, a combination that keeps the bolt body light while giving the internal components resistance to corrosion. It features a one-way valve that prevents air from re-entering the circuit during bleeding, speeding up the operation and reducing the number of pumping cycles needed. The dust protection cap has an anodized finish that seals the bleed point from dirt when not in use.
The photo shows the silver-toned metal body of the screw with its through-thread and hollow central channel, alongside the orange anodized cap that closes it off from the outside, a detail that makes the front bleed point easy to identify at a glance.
Thanks to the one-way valve and hollow design, brake bleeding is completed in less time and with less fluid, while also keeping the bleed point protected from dust and moisture between services.
Los productos disponibles se enviarán siempre que haya existencias. Aquellos que no estén disponibles de forma inmediata se solicitarán a nuestro proveedor oficial cada día laborable, momento en el que se calcularán los tiempos estimados de recepción, salvo durante el 24 de diciembre al 2 de enero, periodo en el que los pedidos se gestionarán a partir del 2 de enero debido a las vacaciones.
Los envíos se realizan mediante transportista, con un plazo aproximado de 48 a 72 horas laborables para entregas nacionales. Los envíos internacionales pueden tardar entre 5 y 10 días laborables, salvo en periodos de parón por mantenimiento, vacaciones o alta demanda, como durante el Black Friday.
La entrega de motos se coordina directamente con el comercial durante la compra.
KTM Banjo Bolt with Bleeder Function
49.07
39.25
Save 20%
¡BLACK FRIDAY!
77013920100
In this way, brake bleeding or brake fluid change is a matter of seconds: First, replace the original purging screw with the new screw with return valve. To change the brake fluid or purge the system, you only have to open the return valve screw half-turn and pump with the brake handle to circulate the brake fluid through the system. The valve prevents air from entering the system again by dropping the brake lever. It is delivered with anodized anti-pollute cap. For rear brake pump.