BRAKE BLEEDERSCREW

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake calliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodised dust cap.

• Option 1: 

- SX(04-08)

- EXC(04-09)

- 125/200/250/390 DUKE (11-20) REAR

- RC 125/200/250/390 (14-20) REAR

- SM (07-09) REAR

- SMC/R (08-20) REAR

- ENDURO/R (08-20) FRONT AND REAR

- 690 DUKE/R (08-20) REAR

- 950/990 ADVENTURE (03-12) FRONT

- 990 SUPER DUKE (05-13) REAR

• Option 2:

- SX (09-20)

- EXC/XC-W (10-20)

- SIX DAYS (09-20)

- 125/200/250/390 DUKE (11-20) FRONT

- RC 125/200/250/390 (14-20) FRONT

- 990 SM R (09-11) FRONT

- 990 SUPER DUKE (05-06)

- 1190 RC8/R (08-15) FRONT